Manure scrapers
Manure scrapers for alley in barns
Manure scrapers are specialized, automated, or manual systems used in livestock farming to efficiently remove manure, waste, and bedding from barn alleys, pens, and gutters. These systems—including chain-driven, rope, and hydraulic models—improve hygiene, reduce labor, and enhance animal comfort. They are often adapted for slatted floors or solid flooring
Manure Scrapers FS2 Flap scraper for channels
- 2 side flap scraper for Middle guidance/ Solid construction in galvanized steel.
- Cleaning the gangway in both directions with one scraper!
- Delivered as standard with lateral wings, which are ensuring clean borders and compensate the difference in width of the gangway.
FS Flexible Manure Scraper
- FLAP Scraper Solid and heavy construction, in galvanised steel with lateral wings
- Lateral flaps are opening automatically on the way backwards
- Due to its flexible construction this scraper adapts automatically to the gangway
- Also available as flap scraper for gangways equipped with rubber mats and without middle guidance.
V type scraper
The V-Shape Scraper is best suited to clean narrow alleys or when manure dries fast. Best suited to clean narrow alleys or when manure dries fast. Can be adapted to clean an alley that varies in width. Available with floor mounted or groove guided draw bar. Available with steel blades or flexible urethane blades that can be adjusted to compensate wear. Several draw bar accessories available for concrete alley, rubber flooring and sand bedding. V-Shape bidirectional scraper is designed for a free stall barn having a cross gutter in the center and one scraper per alley.
- Solid scraper construction, in galvanized steel
- Heavy version: no need of filling the scraper with concrete
- V-form of the scraper allows the animals simply to step over the scraper
- When the scraper is moving backwards the animals can just pass on the side
- Adapts to gangways of different width
- Very good for cleaning the gangways with straw bedding
- Available as two-side V-
VS V type Manure Scraper
- V Form Scraper for middle guidance / Solid scraper construction, in galvanized steel Heavy version
- V-form of the scraper allows the animals simply to step over the scraper
- Adapts to gangways of different width
- Very good for cleaning the gangways with straw bedding
- Available as two-side V-form scraper for gangways with a discharge into a cross channel in the middle
Manure Scrapers SLS Scrapers for under slated floors
- Scaper for slated floor Solid construction in galvanised steel
- This scraper cleans the slatted floor in both directions. Rubber lips are pushing manure into the manure channel
- With rubber star devices on both ends for cleaning the borders of gangways
- Special plastic rope light weight, safely use in gangways
Scraper control Unit for manure sacrapers
Scraper control Unit SCT 805
- For controlling of one scraper system with two drive units SDU 800 -1000
- Manual and automatic operation possible with installed timer
- With obstacle detection: automatic stop and start attempts.
- Integrated frost-protection program: when additionally connected to a thermostat.
- Connection possibilities for a quadruple control switch board and a security stop switch.
Scraper control Unit SCT 900
- For controlling of one scraper system with two drive units SDU 800 -1000
- Manual and automatic operation possible with installed timer
- With obstacle detection: automatic stop and start attempts.
- Integrated frost-protection program: when additionally connected to a thermostat.
- Connection possibilities for a quadruple control switch board and a security stop switch.
Scraper control Unit SCT 914
- For controlling of one scraper system with two drive units of Type 850 or Type 900
- Two programs possible:
- Program #1 (for exemple for a scraper for slatted floor) = the scraper stops at both ends of the gangway.
- Program #2 = the scraper moves backwards directly after moving forwards
- Manual and automatic operation possible
- With installed timer and membrane keypad
- Integrated frost-protection program: when additionally connected to a temperature sensor and given minus temperatures the controller
- switches automatically into a non-freezing program (moving at certain intervals)
- Main switch in scope of delivery
- Connection possibilities for a quadruple control switch board